In engineering centistokes (cSt) are usually used. Multiply the cSt value by 4.664 if the test temperature was 210 F. The result is the cSt value converted to SUS.

I think Traxxas did this (IMO) in order to keep the Xmaxx's starting out current within the limits of the VXL-6 ESC/16000kv motor system on 6s. VISCOSITY CLASSIFICATIONS INDUSTRIAL LUBRICANT CASSIFICATIONS ISO (International Standards Organisation) viscosity classification The ISO viscosity classification uses mm2/s (cSt) units and relates to viscosity at 40oC. Viscosity kinematic unit conversion between square meter/second and square millimeter/second, square millimeter/second to square meter/second conversion in batch, m2/s mm2/s conversion chart However, the commonly used measure is the stokes (or stoke) where 1 St = 10⁻⁴ m²/s. In the SI the unit is m²/s. Water at 20 °C has a kinematic viscosity of about 1 cSt.

or mm2/s) Assumes that viscosities are at the same temperature and the Viscosity Index is 95. 1 stoke = 100 centistokes = 1 cm²/s = 0,0001 m²/s 1 cSt = 1 mm 2 /s Enlaces externos. Bookmark square millimeter/second to centistokes Conversion Calculator - you will probably need it in the future. The relationship between saybolt seconds and kinematic viscosities is linear above 75 cSt. 35 SSU ~ 2.5 cSt 550 SSU ~ 119 cSt

Values of 10 000 or greater will be displayed in the e-format e.g. To Convert Kinematic Viscosities above 75 cSt to SUS at 210°F, multiply by 4.664.

Its symbol is St.

1 St = 100 cSt or 1 cSt = 10⁻⁶ m²/s. ›› Metric conversions and more ConvertUnits.com provides an online conversion calculator for all types of measurement units.

Lenntech.com (conversor de unidades).

Kinematic Viscosity Centistokes. Values are given to seven significant figures ( the odd result may show 9's or 0's over running).

Note sulle conversioni Non tutte le conversioni di queste unità sono valide per qualsiasi valore, alcune di esse sono state a suo tempo create dagli autori (es.

100 cSt tested at 100 F is equivalent to 463.2 SUS because 100 x 4.632 = 463.2.

Its symbol is St. However, the commonly used measure is the stokes (or stoke) where 1 St = 10⁻⁴ m²/s.

From. How to convert centistokes to square millimeters per second [cSt to mm²/s]:.

The SI prefix "milli" represents a factor of 10-3, or in exponential notation, 1E-3..

Viscosity kinematic unit conversion between square meter/second and centistokes, centistokes to square meter/second conversion in batch, m2/s cSt conversion chart ... cSt↔mm2/s 1 cSt = 1 mm2/s cSt↔um2/s 1 cSt = 1000000 um2/s cSt↔m2/min 1 m2/min = 16666.666666667 cSt cSt↔m2/h 1 m2/h = 277.77777777778 cSt

››Definition: Millipascal-second. I think (IMO) why the Castle MM2's and the Castle MM-X's feel more ***** than the stock Traxxas VXL-6 is because, I think the VXL-6 has a good amount punch control pre-programed into it from the factory.

Widman.biz (graficador de viscosidades). So 1 millipascal-second = 10-3 pascal-second. To convert centistokes to SUS at 100°F, multiply by 4.632 1 Both units are large and, for practical purposes, it's more common to use the centipoise (cP) and centistoke (cSt), which are equal to one one-hundredth of the corresponding whole unit. To Convert Kinematic Viscosities above 75 cSt to SUS at 210°F, multiply by 4.664.

s) Centipoise is properly abbreviated cP, but the alternate abbreviations cps and cPs are also commonly seen. Conversion to cP to cSt is Simple To get centistokes from centipoise, divide by the density. 1 St = 100 cSt or 1 cSt = 10⁻⁶ m²/s.

2.3456e7 which equals 2.3456 x … Degrees Engler (°E) Seconds Saybolt Universal (SSU) Seconds Saybolt Furol (SSF) Seconds Redwood n. 1 (Standard) Seconds

To convert centistokes to SUS at 100°F, multiply by 4.632 1 I think Traxxas did this (IMO) in order to keep the Xmaxx's starting out current within the limits of the VXL-6 ESC/16000kv motor system on 6s. Utiliser le convertisseur Kinematic Viscosity Converter